Custom Wooden Standees Design Guide

Prepare your artwork for custom wooden standees with Vograce. This guide covers double-sided printing, sizing, borders, bleed, base design, and file requirements to help you get your designs ready for production.

Wooden Standee Design Guidelines

1. Double-Sided Printing

When the same artwork is printed on both sides, the back design will be mirrored by default.

For different front and back designs:

  • Select "Double sided different designs" when ordering.

  • Upload the front and back artwork separately.

  • Clearly label each design or place them on separate layers.

Important: If your artwork contains text, provide correctly oriented designs for both sides to prevent mirrored text on the back.

2. Size and Measurement

Wooden standee size is measured by the longest edge of the finished wooden piece, including the border—not just the printed artwork.

  • Consider the complete outline when choosing your standee size.

  • Keep important artwork details away from the cutting edges.

  • Check the available size and material options before ordering.

For different wood materials and customization options, explore our Custom Natural Wooden Standees.

3. Default Border Width

The standard wooden standee border width is 1 mm.

  • If you prefer a 2 mm border, specify this in your order notes.

  • You do not need to draw the cutting outline yourself.

  • Simply upload your original artwork, and our designers will prepare the cutting outline for you.

If you have specific requirements for the outline, clearly describe them when placing your order.

4. Borderless Wooden Standees

For borderless designs, a 0.2–0.5 mm external bleed is recommended to reduce the risk of cutting misalignment.

  • Extend the background artwork beyond the intended cutting edge.

  • Avoid placing important details directly along the edges.

  • You do not need to draw the cutline yourself. Our designers will prepare it based on your artwork.

For full-edge printing options, see our Custom Full Bleed Synthetic Wooden Standees.

Please follow the additional cutting and minimum-width requirements listed on that product page. Avoid thick decorative outlines near the cutting edge, as they may become misaligned or partially cut off.

5. Standee Base Design

The base supports the wooden standee and should be considered when preparing your design.

  • Check the base dimensions and shape options available for your selected product.

  • For standard natural and synthetic wooden standees, a base with equal length and width is made round by default.

  • If you prefer a different base shape, specify your requirements in the order notes.

For full-bleed synthetic wooden standees, the base plate does not require additional bleed. Follow the corresponding product's requirements for the stand insert and cutting dimensions.

Artwork File Requirements

6. File Formats and Resolution

For clear and accurate printing, prepare your artwork according to the following specifications:

Requirement Specification
File formats PSD, CDR, JPG, PNG, PDF, AI
Resolution 300 DPI recommended
Image dimensions At least 1,000 pixels on the longest side
Color mode CMYK
Preferred files Transparent-background PNG or layered PSD
White lines Greater than 0.5 mm
Colored lines Greater than 0.3 mm

Use high-resolution artwork and avoid enlarging small images beyond their intended printing dimensions.

For double-sided printing, keep front and back designs clearly separated. If you have special artwork requirements, include clear instructions when uploading your files.

7. Material and Printing Considerations

Vograce offers both natural and synthetic wooden standees, each with different material characteristics.

  • Natural wood: Natural variations in grain, color, and texture may affect the finished appearance.

  • Synthetic wood: Offers alternative wood-style materials and colors for custom designs.

  • Fine details: Keep small text and thin lines sufficiently clear to maintain visibility after printing.

For additional material choices, explore our Custom Synthetic Wooden Standees.

Before Placing Your Order

Please check that:

  • Your selected size includes the wooden border.

  • Front and back artwork is correctly oriented.

  • Any requested 2 mm border is clearly specified.

  • Borderless designs include the recommended bleed.

  • The standee base requirements are clearly communicated.

  • Fine lines meet the applicable printing specifications.

  • Files have the correct format, resolution, and color mode.

Once your artwork is ready, browse our Custom Wooden Standees collection to choose your preferred material, design style, and customization options.

Anime-style wooden keychain upgrade diagram showing different bleed lines and borderless design options.