Custom Wooden Pins Design Guide
Prepare your artwork for custom wooden pins with Vograce. This guide covers double-sided printing, sizing, borders, bleed, and file requirements to help you get your designs ready for production.
Wooden Pin Design Guidelines
1. Double-Sided Printing
When the same artwork is printed on both sides, the back design will be mirrored by default.
For different front and back designs:
-
Select "Double sided different designs" when placing your order.
-
Upload the front and back artwork separately.
-
Clearly label each design to avoid confusion during production.
Important: If your artwork contains text, provide correctly oriented designs for both sides to prevent mirrored text on the back.
2. Size and Measurement
Wooden pin size is measured by the longest edge of the finished wooden piece, including the border—not just the printed artwork.
-
Consider the complete outline when selecting your pin size.
-
Keep important text and design details away from the cutting edge.
-
Check the available dimensions on your selected product page.
For material and size options, explore our Custom Natural Wooden Pin Badges.
3. Default Border Width
The standard wooden pin border width is 1 mm.
-
If you prefer a 2 mm border, specify this in your order notes.
-
You do not need to draw the cutting outline yourself.
-
Simply upload your original artwork, and our designers will prepare the outline according to your design.
If you have specific border requirements, please include clear instructions when ordering.
4. Borderless Wooden Pins
For borderless designs, leave a 0.5 mm bleed area filled with the background color to allow for cutting.
-
Extend the background artwork beyond the intended cutting edge.
-
Avoid placing important elements directly along the edges.
-
There is no need to draw the cutline yourself. Our designers will prepare it based on your uploaded artwork.
For full-edge printing, see our Custom Full Bleed Synthetic Wooden Pins. This product has additional cutting requirements, so please follow its specific artwork instructions.
Keep the original border and bleed comparison image here.
Artwork File Requirements
5. File Formats and Resolution
For clear and accurate printing, please prepare your files according to the following specifications:
| Requirement | Specification |
|---|---|
| File formats | PSD, CDR, JPG, PNG, PDF, AI |
| Resolution | 300 DPI |
| Image dimensions | At least 1,000 pixels on the longest side |
| Color mode | CMYK |
| Preferred files | Transparent-background PNG or layered PSD |
| White lines | Greater than 0.5 mm |
| Colored lines | Greater than 0.3 mm |
Avoid enlarging low-resolution images, as this may reduce print clarity. Make sure fine lines and important details remain visible at the finished pin size.
6. Material and Printing Considerations
Wooden pins are available in different materials, including natural and synthetic wood.
-
Natural wood: Color, grain, and texture may vary between individual pieces.
-
Synthetic wood: Offers alternative material and appearance options for custom designs.
-
Printing: Keep small text, thin lines, and detailed illustrations clear and easy to distinguish.
For additional material options, explore our Custom Synthetic Wooden Pin Badges.
Before Placing Your Order
Please check that:
-
The selected size includes the wooden border.
-
Front and back designs are correctly oriented.
-
Any requested 2 mm border is clearly specified.
-
Borderless artwork includes the required bleed.
-
Fine lines meet the printing requirements.
-
Your files have the correct format, resolution, and color mode.
-
Any special design requirements are clearly noted.
Once your artwork is ready, browse our Custom Wooden Pin Badges collection to select your preferred material and style.