Custom Acrylic Standees Design Guide
Creating custom acrylic standees starts with properly prepared artwork. This guide covers double-sided printing, sizing, borders, transparency, special finishes, and file requirements to help you prepare your designs for production at Vograce. Notes: Vograce acrylic standees (except epoxy ones) come with a protective film on the surface. Please peel off the protective film before assembly for the best appearance!
Acrylic Standee Design Guidelines
1. Double-Sided Printing
When using the same artwork on both sides, the back design will be mirrored by default.
For different front and back designs:
-
Upload the front and back artwork separately.
-
Select "Double sided different designs" when placing your order.
-
Make sure both designs are correctly oriented before uploading.
Important: If your artwork contains text, select different designs for each side to prevent the text from appearing mirrored on the back.
2. Size and Measurement
Acrylic standee size is determined by the longest edge of the finished acrylic piece, including its border—not just the printed design.
-
Measure the complete standee outline, including the acrylic border.
-
Check the available size options on the product page before ordering.
-
Consider how your artwork will fit with the standee base.
For standard options, see our Custom Clear Acrylic Standees.
3. Default Acrylic Border
The standard acrylic border width is 2 mm.
You do not need to create the cutting outline yourself. Simply upload your original artwork, and our design team will prepare the outline according to your design.
If you have specific cutting or border requirements, include clear instructions with your order.
4. White Outlines and Borders
White outlines may appear slightly thinner on the finished acrylic standee, particularly near the edges.
To achieve a clearer result:
-
Avoid extremely thin white borders.
-
Make white outlines slightly wider in your artwork.
-
Contact Vograce customer service if you need help reviewing your design before production.
5. White Ink and Transparency
White printed areas require a solid white ink backing. Therefore, white does not support semi-transparent effects.
For other semi-transparent colors, avoid extremely low CMYK values, as very light colors may appear washed out or less visible after printing.
Special Finishes and Artwork Preparation
6. Borderless Acrylic Standees
For borderless designs, extend the background color by 0.5 mm beyond the intended cutting edge to provide bleed.
-
Include the required bleed area in your artwork.
-
You do not need to draw the cutline yourself.
-
Avoid placing important design details too close to the cutting edge.
For a finished appearance without transparent acrylic borders, explore our Custom Full Bleed Acrylic Standees.
7. Gradient and Semi-Transparent Effects
If your design includes gradients or semi-transparent areas:
-
Place these effects on separate, clearly named layers whenever possible.
-
Alternatively, include "semi-transparent" in your file name and leave a note with your order.
-
Avoid excessively pale colors in semi-transparent areas. Slightly darker tones can help maintain visibility.
For different material appearances, you can also explore Custom Colored Acrylic Standees. Please check the specific product options before ordering.
Artwork File Requirements
8. File Formats and Resolution
To prepare your artwork for printing, follow these general specifications:
| Requirement | Recommendation |
|---|---|
| File formats | PSD, PNG, PDF, AI; JPG and CDR also accepted for applicable products |
| Resolution | 300 DPI recommended; at least 1,000 pixels on the longest side |
| Color mode | CMYK |
| Preferred artwork | Transparent-background PNG or layered PSD |
| Double-sided designs | Clearly separated and identified front and back artwork |
| Special effects | Separate named layers or clear order notes |
Requirements may vary for special standee types. Always check the instructions on the product page you are ordering from.
For a more detailed walkthrough, read our Step-by-Step Guide to Creating Custom Acrylic Standees.
Before Placing Your Order
Check the following details before submitting your artwork:
-
The selected size includes the acrylic border.
-
Front and back designs are correctly oriented.
-
White borders are sufficiently wide.
-
Transparent and gradient effects are clearly marked.
-
Borderless artwork includes the required bleed.
-
Files meet the recommended format and resolution requirements.
-
Any special requirements for the standee base are clearly communicated.
Once your artwork is ready, browse our full collection of Custom Acrylic Standees to select the appropriate style and customization options.