Custom Thicken Pre-filled Quicksand Liquid Acrylic Standees
Buy at discounted prices
| Minimum Qty | Discount |
|---|---|
| 6 + | 10% off |
| 16 + | 20% off |
| 50 + | 25% off |
| 100 + | 30% off |
| 300 + | 35% off |
| 500 + | 44% off |
| 1000 + | 49% off |
| 2000 + | 53% off |
| 3000 + | 57% off |
| 5000 + | 60% off |
| 10000 + | 62% off |
| Product name | Thicken Pre-filled Quicksand Liquid Acrylic Standees |
| MOQ | 3 pieces |
| Printing | CMYK Printing |
| Template | https://drive.google.com/drive/folders/1yDk-Jm7kMjrVXJmUN4SMHz_c4A1HIuk0?usp=sharing |
| File requirements | 1.Resolution: 300 DPI or 1000 pixels, Color Mode: CMYK 2.File formats: JPG, PNG, PSD, JPEG, etc. 3.Three design drawings are required: front design, middle design, and back design. 4.The white ink layer print must leave a 2mm transparent border. For full bleed and semi-transparent, the single side bleed should include a 1.5mm bleed. These should be on separate layers. 5.The gap width between the outer and inner cutting lines should be at least >3mm. The oil-filled hole needs to be tangent to the inner cutting line, and it's recommendedto place it where there is a pattern. |
| Notice |
There is a protective film on the surface of vograce acrylic standees(except the epoxy ones). The keychains will be very bright and transparent after films are torn off! If you have ordered more than 5 standees or have special requirements, we will offer you with proof/cutlines for confirm Due to restrictions on liquids in shipping, if the quantity exceeds the allowable limit, the shipping cost cannot be calculated. In such cases, you can split the order into multiple batches. |
